Two bathymetric surveys of Darwin Harbour were undertaken during the period 17 October to 07 November 2010 and 24 June to 20 August 2011 by iXSurvey Australia Pty Ltd for Darwin Port Corporation and Department of Lands Planning, and the Department of Natural Resources, Environment, The Arts and Sport (NRETAS) in collaboration with Geoscience Australia (GA), the Darwin Port Corporation (DPC) and the Australian Institute of Marine Science (AIMS) using iXSurvey's and GA's Kongsberg EM3002D multibeam sonar systems and DPC's vessel 'Matthew Flinders'.

The Casey Station Bathymetry Survey was conducted last summer from December 2014 to February 2015. This collaborative survey was undertaken by Geoscience Australia, the Royal Australian Navy and the Australian Antarctic Division, using the AAD's workboat the RV Howard Burton. The survey goal was to acquire high resolution bathymetry data to improve our understanding of the seafloor using multibeam sonar. The bathymetry data collection will be supplemented by physical sampling of the seafloor sediments and video recordings of the biological communities living in the seafloor. The survey will cover areas that haven't been charted during the 2013 Casey Survey and are frequently used by the RSV Aurora Australis. Improving our understanding of the seabed environment in these shallow coastal waters will ultimately lead to a better environmental management of the Australian Antarctic Territory. The data will also help the RAN to develop more accurate navigation charts therefore reducing the risk to maritime operation in the region.

The WA Margins Reconnaissance survey, GA-2476 was acquired during October 2008 to January 2009 onboard the RV Sonne as part of the Energy Security Program. Almost 230,000 km² of multibeam bathymetry was acquired over the duration of the survey including all transits. Seafloor features revealed by the backscatter and swath bathymetry have shown that geomorphology of the study areas is diverse. The continental slope of the west Australian margin study areas is characterised by large areas with numerous deeply incised canyons and areas with low-angle slumps and scarps mostly on the upper part of the slope. Other geomorphic features on the continental slope include short escarpments of local extent and small volcanic peaks over the Houtman Sub-basin part of the Perth margin. New bathymetry from the Cuvier Plateau has mapped large volcanic domes, some of them with terraces, ridges, a large previously unmapped valley and two large seamounts (newly named the Cuvier Seamount and the Wallaby seamount). The dataset contains eight XYZ grids of 100m resolution; colour tiff images shaded with sun azimuth 45 degrees and a geotiff of the entire survey with a depth legend to go with the images.<p><p>This dataset is not to be used for navigational purposes.

Geoscience Australia conducted a marine survey to provide seabed environmental information to support the assessment of the CO2 storage potential of the Vlaming Sub-Basin. The survey was undertaken under the Australian Government's National CO2 Infrastructure Plan (NCIP) to help identify sites suitable for the long term storage of CO2. The major aim of this survey was to look for evidence of any gas fluid seepage at the seabed and wether the location had faults that have been identified in a number of seismic lines. The survey also mapped seabed biota in the area of interest to indentify any biota communities that are related with seepage. This research addresses key questions of the regional seal integrity of the Southern Perth Shale and the potential for storing of CO2 in the Early Cretaceous Gage Sandstone. The survey was conducted by Fugro's Southern Supporter in the Vlaming Sub-Basin, North and South of Rotnest Island between the period of the 17th of March to the 20th of April 2012. Shallow seismic sub bottom profiler data were acquired as well as high resolution multibeam bathymetry and backscatter data during the survey. This dataset is not to be used for navigational purposes.<p><p>This dataset is not to be used for navigational purposes.

The Petrel Sub-basin Marine Environmental Survey GA-0335 was acquired by the RV Solander during May 2012 as part of the Commonwealth Government's National Low Emission Coal Initiative (NLECI). The survey was undertaken as a collaboration between Geoscience Australia and the Australian Institute of Marine Science (AIMS) . The purpose was to acquire geophysical and biophysical data on shallow (less than 100m water depth) seabed environments within two targeted areas in the Petrel Sub-basin to support investigation for CO2 storage potential in these areas.<p><p>This dataset is not to be used for navigational purposes.

Geoscience Australia carried out marine surveys in Jervis Bay (NSW) in 2007, 2008 and 2009 (GA303, GA305, GA309, GA312) to map seabed bathymetry and characterise benthic environments through colocated sampling of surface sediments (for textural and biogeochemical analysis) and infauna, observation of benthic habitats using underwater towed video and stills photography, and measurement of ocean tides and wavegenerated currents. Data and samples were acquired using the Defence Science and Technology Organisation (DSTO) Research Vessel Kimbla. Bathymetric mapping, sampling and tide/wave measurement were concentrated in a 3x5 km survey grid (named Darling Road Grid, DRG) within the southern part of the Jervis Bay, incorporating the bay entrance. Additional sampling and stills photography plus bathymetric mapping along transits was undertaken at representative habitat types outside the DRG. The dataset contains 11 bathymetry grids of Jervis Bay survey area produced from the processed EM3002 bathymetry data using the CARIS HIPS and SIPS software. Please see the metadata for detailed informaiton.<p><p>This dataset is not to be used for navigational purposes.

Geoscience Australia conducted a marine survey (GA-0345 andGA-0346 /TAN1411) in Commonwealth waters of the north-eastern Browse Basin (Caswell Sub-basin) between 9 October and 9 November 2014. The purpose of the survey was to collect pre-competitive marine data to support a CO2 storage assessment in the Browse Basin, with particular emphasis on the integrity of seals overlying select CO2 storage plays. Data acquisition was undertaken as part of the National CO2 Infrastructure Plan (NCIP), administered by the Department of Industry and Science. The survey was conducted in 3 Legs aboard the New Geoscience Australia (GA) conducted a marine survey (GA0345/GA0346/TAN1411) of the north-eastern Browse Basin (Caswell Sub-basin) between 9 October and 9 November 2014 to acquire seabed and shallow geological information to support an assessment of the CO2 storage potential of the basin. The survey, undertaken as part of the Department of Industry and Science's National CO2 Infrastructure Plan (NCIP), aimed to identify and characterise indicators of natural hydrocarbon or fluid seepage that may indicate compromised seal integrity in the region. The survey was conducted in three legs aboard the New Zealand research vessel RV Tangaroa, and included scientists and technical staff from GA, the NZ National Institute of Water and Atmospheric Research Ltd. (NIWA) and Fugro Survey Pty Ltd. Shipboard data (survey ID GA0345) collected included multibeam sonar bathymetry and backscatter over 12 areas (A1, A2, A3, A4, A6b, A7, A8, B1, C1, C2b, F1, M1) totalling 455 km2 in water depths ranging from 90 - 430 m, and 611 km of sub-bottom profile lines. Seabed samples were collected from 48 stations and included 99 Smith-McIntyre grabs and 41 piston cores. An Autonomous Underwater Vehicle (AUV) (survey ID GA0346) collected higher-resolution multibeam sonar bathymetry and backscatter data, totalling 7.7 km2, along with 71 line km of side scan sonar, underwater camera and sub-bottom profile data. Twenty two Remotely Operated Vehicle (ROV) missions collected 31 hours of underwater video, 657 still images, eight grabs and one core. This catalogue entry refers to bathymetry data acquired during survey GA0345/GA0346/TAN1411.

This dataset contains the processed bathymetric dataset from the Lord Howe and Lord How Island survey area held by Geoscience Australia. This dataset includes multibeam echosounder data and was gridded at 50m resolution of the Lord Howe survey area and a 10m resolution of Lord Howe Island, based on the optimal resolution for the depth range encountered. The objective of the survey on the Lord Howe Island shelf (NSW) in 2008 (SS062008) was to map seabed bathymetry and characterise benthic environments through co-located sampling of surface sediments and infauna, rock coring, observation of benthic habitats using underwater towed video, and measurement of ocean tides and wavegenerated currents. Subbottom profile data was also collected to map sediment thickness and shelf stratigraphy. Data and samples were acquired using the National Facility Research Vessel Southern Surveyor. This dataset is published with the permission of the CEO, Geoscience Australia. Not to be used for navigational purposes.

The NSW Continental Slopes survey GA-2413, SS10/2006 was acquired by Geoscience australia onboard the RV Southern Surveyor from the 12th of October to the 25th of October 2006. The geographical range stretched from Jervis bay in the South to Port Stephens in the North. The aim was to assess the physical nature of the NSW continental slope, improve our understanding of the surface and subsurface structure of the continental slope and to investigate the history of sediment movement along the continental slope.<p><p>This dataset is not to be used for navigational purposes.

The Mentelle Basin survey GA-0293, SS08/2005 was acquired by Geoscience Australia onboard the RV Southern Surveyor from the 28th of September to the 19th of October 2005. This deep water rift basin (up to 4500m depth) is located offshore from Fremantle on the SW Australian margin. The objectives of the survey was to study deep water marine habitats and to assess the petroleum potential of the Mentelle Basin. The swath data collected covered a new area of seabed that revealed the extents of the blind submarine canyons and completed the coverage of the Perth Canyon and filled the remaining gaps with high resolution swath bathymetry data.<p><p>This dataset is not to be used for navigational purposes.